Bottle Stopper DVD

As a full time professional demonstrator on one of the largest woodworking show circuits in America and Canada, I turn in front of crowds every weekend for 7 months out of the year. Bottle Stoppers are always a huge crowd pleaser, so I turn tons of them. I go from a square block of wood to a finished bottle stopper in about 5 minutes. The four stoppers below on the left are some of the ones I made in front of crowds at wood shows. Two are walnut and two are ash. The center one on the right was made during filming of my "I have a lathe. Now What?" learn-to-turn video. Click Photos to Enlarge View I have prepared an easy to understand How-To DVD 48 minutes long, just for you. Everything you need to know to get started off right is covered including materials, accessories, methods and finishing. Bonus #1 I have included a PDF file with over 50 Full Sized, Fine-Line Drawings of Classic Bottle Stopper Designs. Turning the stoppers is the easy part. Coming up with good looking designs that flow well and have stunning eye appeal is the hard part. You can print out any design you like and use it right at the lathe to make a beautiful stopper.
`Here Is What You Will Learn`
We turn these three stoppers together on the DVD - Screw-On Stoppers Cork Silicone
Note Your total investment in bottle stopper turning hardware should be less than $50 and includes everything I list below. I don't sell any of it myself, but I do list sources for you.
You will learn about Collet Chucks and Drawbars used with 3/8" and 1/2" wooden dowels and where to get them cheap!
You will learn about Mandrels used with screw-on stopper bottoms and where to get them.
You Get a PDF file for your computer with over 50 full sized fine line drawings to print out and use at the lathe. These are classic designs which will assure your success from the first stopper.
This DVD is for all skill levels. If you have never turned before, I recommend you view the DVD "I have a lathe. Now what?" Bottle stoppers are a collection of humps, hollows, flats and tapers. They are pretty easy and very quick. It is useful if you can roll a bead and scoop out a cove. If not, there are plenty of simple designs for you to choose from.	This information is for you whether you have a mini lathe, or a midi lathe, or a full sized lathe. I turn my stoppers on a Powermatic 3520A. At Woodworking shows in front of large crowds, I turn on a Jet Mini Lathe. You don't need lots of hardware or a big lathe to make really beautiful bottle stoppers very quickly and easily.
Instant Finishing I show you how to finish your stoppers right on the lathe in about 2 minutes.	Stoppers can be used for wine bottles, but also for vinegar and for oil, especially olive oil.
Resources I give you the suppliers for everything you need to make wonderful stoppers for your own family and friends. Many folks sell them for a pretty good part time income. I have a friend who has sold over 100,000 stoppers! Yes, he is one of the folks who taught me.	100% Money Back Guarantee Just Like Everything else I sell. If you are not satisfied, I'll give your money back. No catches, no fine print. Business the way it used to be done. I'm old; that's the only way I know how to treat folks. Been working pretty good for the last 60 years. I'm too old to change now.
Only $19.95 + $2.95 S/H